| 1092 |
Round steel flanges acc. to DIN EN 1092-1 incl. strength proof |
| 1514N / 159N |
Flat gaskets. Geometry according to DIN EN 1514-1. Gasket data according to DIN EN 13555.
Extensive manufacturer database. |
| 10220 |
Calculation of welded / seamless steel pipes according to DIN 10220 (replaces 2448 / 2458) |
| A2 |
Design of safety valves for pressure vessels |
| AKR |
Stress verification for pressure vessels with knuckles in the external shell |
| B1.1 |
Pipe bends under internal pressure according to AD 2000 / B1 Annex 1(see also BOG) |
| B51A |
Verification of axial forces according to AD-Merkblatt B5 section 6.7.1.7 (demanded in B5) |
| B51C |
Verification of flat tube sheets with protruding flange edge |
| B51F |
Fatigue strength of fixed hea exchanger tube sheets according to the guidelines Catalogue Strength (RKF) Part 5 and 6 |
| B5A1 |
Calculation of plain rectangular pipes and partial chambers according to B5/1 (rectangular cross-sections)
s. also EN 15 |
| BEIN |
Stress verification for vessels on supporting feet |
| BIEG |
Surface moments of inertia of profile steels |
| BOG |
Pipe bends under internal pressure according to TRD 301, Annex 2 |
| BV29 |
Calculation of chambers in divided and undivided design |
| DICH |
Calculation of gasket characteristics (see also module 1514N) |
| ECKA |
Sizing of diagonal stays on fire tube heads |
| ELKR |
Elasticity criterion and support span of pipelines according to HP100R (simplified) |
| FGB |
Flat domed heads according to John F. Harvey / Schwaigerer |
| HLB |
Stress verification of pressure vessels with welded-on half-pipes |
| HOSE |
Y-shaped branches under internal pressure according to TRD-301 |
| HPR |
Elasticity criterion and spans as well as construction regulations for pipelines made of metallic materials according to AD2000 / data sheet HP 100 R |
| IGEL |
Nozzle verification on pressure vessels, determination of local forces and moments from the NozzleSpecApp and their superposition for vertical and horizontal vessels. see also ESMC 912
(requires AD/ B1+B3+B9 ) |
| Package price IGEL + AD/ B1 + B3 + B9 |
| ESMC 912 |
BASF works standard: Load transformation at nozzle loads for horizontal tanks on two saddles according to BASF E-S-MC 912 (April 2016) with consideration of the NozzleSpecApp |
| KSTA |
Calculation of stresses, displacements, shear forces and moments of columns with additional support bearings. |
| LOBO |
Free resting perforated plates & perforated plates with anchors and supports according to AD/B5 |
| Podest |
Verification of vessels on a single, central cylindrical support element according to WRC 537 and AD 2000 S3.3 |
| PRAT |
Geometrical values of the brackets used in AD Merkblatt S3.4 |
| RING |
Verification of double jacket connections on containers |
| RUER |
Strength verification of nozzles and block flanges with / without mutual influence in agitator covers and heads |
| SEGB |
Segmental bends with one or more segments according to ANSI |
| SG |
Gauge glass flange according DIN 28120 |
| SPAR |
Design of clamping rings |
| STUT |
Determination of additional stresses due to pipe forces on nozzles |
| TEB / TEB1 |
Heat exchanger heads according to TEMA |
| TEM |
Longitudinal stresses in shell and tubes of heat exchangers with stationary tube sheets |
| Strength calculation according to TEMA package price TEB / TEB1 / TEM |
| TEB 2 |
Pipe bends and T-pieces according to ASME/ANSI B31.3 with external loads |
| TR28 |
Support rings with/without additional ring carrier according to DIN 280084-1 as an addition to S3.5 |
| TST |
Cylindrical shells with vertical branch under internal pressure |
| UNRD |
Out-of-roundness of cylindrical and conical shells according to EN 13445-3, Annex E |
| VFLN |
Welding neck flanges according to DIN 28034 |
| WARZ |
Calculation of knuckles of jacketed vessels |
| WTOR |
Calculation of shafts subjected to a torsional moment. |
| ZAPF |
Calculation of trunnions according to DIN 28085 |
| ZIEH |
Tightening torques of bolts. ISO and UNC threads |