Basic package DIN EN 13445

corresponds to AD 2000 / B

Program description
PROJECT Basic module, BOM
EN 07 / 08 Cylindrical, conical, spherical shells, domed / elliptical heads under internal and external pressure
EN 09 Single nozzles in cylindrical, conical and spherical shells (incl. SIK module)
EN 10 Flat plates (without tube sheets)
EN13.04 – EN13.06 Tube sheets of U-tube, fixed head and floating head heat exchangers according to chapters 13.4, 13.5 and 13.6 of EN 13445-3.
1591

Module package 1591 for the design of round flange connections, bolts and gaskets according to DIN EN 1591 or DIN EN 13445-3 Appendix G incl. flange modules for

ANSI – Flanges (AFLT), DIN EN 1092 (1092), DIN 28034 (VFLN), DIN 28036 (SFLA ) as well as the gasket modules according to DIN EN 1514 (1514N incl. manufacturer data) + DIN EN 1591-2 (159N gasket parameters)

PDEN Test pressure and material characteristics according to DIN EN 13445-5 / chapter 10.2.3.3.1
Pmax-EN Determination of the maximum allowable pressures for the entire vessel.
UNRD Out-of-roundness of cylindrical and conical shells according to DIN EN 13445-3, Annex E
see also module ENAF
WERK Material database with approx. 4700 material entries

Basic package DIN EN 13445
corresponds to AD 2000 / B


Package DIN EN 13445 proof of stability incl. EN 22

  Program description
EN 16.08 Horizontal tanks on saddles incl. S3.2
EN 16.09 Horizontal vessels with ring supports
EN 16.10 Vessels with bracket supports
EN 16.11 Vertical vessels on feet (also inclined)
EN 16.12 Vertical vessels on skirts
EN 16.13 Vertical vessels with ring supports
EN 16.14 Global loads on cylindrical shells
EN 22 Wind loads acc. to DIN EN 13445-3 chap. 22.4 incl. Characteristic values according to DIN EN 1991-1-4, Eurocode 1 ( action on structures) > replaces module WND

Package Stability verification incl. EN 22


Package DIN EN 13445 Fatigue life

  Program description
EN 17 Simplified fatigue life calculation / conservative assumptions
EN 18 Detailed fatigue life calculation

Fatigue Life Package


Individual modules according to DIN EN 13445

Module Program description
ENAF Permissible external pressure for pressure vessels with out-of-roundness exceeding tolerance according to EN 13445-3 Appendix F, incl. UNRD module
ENAJ Alternative methods for the design of tube sheets for heat exchangers according to DIN EN 13445-3 Annex J
ENAO Physical properties of steel according to DIN EN 13445-3 Annex O
EN11 (EFL) Module package EN11 – Flange connections acc. to DIN EN 13445-3 Chap.11 for 13 flange types incl. flange modules for ANSI flanges (AFLT),
DIN EN 1092, DIN 28034 (VFLN), DIN 28036 (SFLA ) as well as gasket modules according to DIN EN 1514 (1514N incl. manufacturer data) and DIN EN 1591-2 (159N gasket parameters)
Extra charge for module package EN 1591
EN 12 Bolted domed ends, convex or concave to pressure per EN 13445-3 chapter 12, see also B4
EN 15 unreinforced and reinforced pressure vessels of rectangular cross-section acc. EN13445-3 chapter 15
(rectangular cross-sections with additional reinforcement) see also B5A1
EN 16.4 / 16.5 Local loads on nozzles in spherical and cylindrical shells, incl. EN16.14
EN 16.06 Line loads according to EN 13445 chapter 16.6
EN 16.07 Lifting lugs – Single load on cylindrical shells and domed heads according to DIN EN 13445-3, chapter 16.7
EN 20 Reinforced flat walls acc. chapter 20 and 21

Combination packages


Basic package EUROPA
Module package AD 2000 / section B + basic package DIN EN 13445

Package price on request


Special package EURONORM
Basic package DIN EN 13445 + stability verification package + module package EN11

Package price on request


DIN EN 12516-2 Valves and fittings

Module Program description
12516-2 Calculation of valve bodies according to DIN EN 12516-2, divided into 4 modules 12516-2A to D, including gasket module 1514N (manufacturer data) and 159N (gasket parameters)

DIN EN 13480-3 Piping

Module Program description
ER06 Pipeline components under internal pressure, straight pipes, pipe bends, segment bends, reducers, conical shells and various joints according to DIN EN 13480-3 Chap. 6
ER07 Domed heads under internal pressure according to DIN EN 13480-3 Chap. 7
ER08 Openings and branches according to DIN EN 13480-3 Chap. 8
ER09 Cylindrical pipes and pipe bends according to DIN EN 13480-3 chapter 9
ER11 Integral attachments to metallic industrial piping. Calculation of trunnionsacc. EN 13480-3 chapter 11
  ZIn addition, the module package EN 1591 for flanges is included in the package.

Basic package EN 13480 incl. Material Database


DIN EN 14025 Tanks for dangerous goods

Module Program description
ADR Minimum thickness and test pressure according to EN 14025 / ADR / RID
DECK Covers for manholes acc. to DIN EN 14025 (6.3.6)
  Additionally the modules EN07 / EN 08 / EN 09 and EN 1591 are included in the package.

Basic package EN 14025 incl. Material Database


Prices on request

*) The support includes assistance for program operation in the usual scope, approx. 1h

Dieser Beitrag ist auch verfügbar auf: Deutsch (German)