Manufacturer |
Gasket |
Dimensions |
D1 |
A.W.Schultze GmbH |
Egraflex Steelflon Waveline WLP |
92 x 49 x 2.3 |
2.3 |
AVKO jsc |
Sheet gasket material of expanded PTFE 3.0 mm AVKOSEAL eC |
92 x 49 x 3.0 |
3 |
AVKO jsc |
Sheet gasket material of expanded PTFE 3.0 mm AVKOSEAL eC |
92 x 49 x 2.0 |
2 |
Donit Tesnit |
Grafilit SP |
92 x 49 x 1.5 |
1.5 |
Donit Tesnit |
MS 16hp (spiral wound gasket; 1.4541 /1.4541 with NQ FG /CS) |
68 x 56 x 5.1 |
5.1 |
Donit Tesnit |
MW12A-3 (corrugated gasket; 1.4571 /nuclear graphite – 0.8 mm) |
84x 49x 2.9 |
2.9 |
Donit Tesnit |
Tesnit BAGL 3000 |
92 x 49 x 2.0 |
2 |
Donit Tesnit |
Tesnit BA-U |
92 x 49 x 2.0 |
2 |
EagleBurgmann |
Burachem ® Multi 9654/MP |
92 x 49 x 2 |
2 |
EagleBurgmann |
Kammprofil Dichtung 9598/P |
68 x 53 x 5 |
5 |
EagleBurgmann |
Spiraltherm 9594/GIA |
66 x 56 x 5 |
5 |
ERIKS bv |
KNS |
71 x 61 x 5.5 |
5.5 |
ERIKS bv |
KV Graphite KV9 Graphite KV9L Graphite |
69 x 53 x 4.8 |
4.8 |
ERIKS bv |
KV PTFE KV9 PTFE KV9L PTFE |
69 x 53 x 4.2 |
4.2 |
ERIKS bv |
R 316 L Graphit C/O 316 L Graphit C/I 316 L Graphit RIR 316 L Graphit |
68 x 56 x 4.5 |
4.5 |
ERIKS bv |
R 316 L PTFE C/O 316 L PTFE C/I 316 L PTFE RIR 316 L PTFE |
68 x 56 x 4.5 |
4.5 |
ERIKS bv |
RX® Fibre PT50 |
92 x 49 x 2 |
2 |
ERIKS bv |
RX® Flowtite |
92 x 49 x 2 |
2 |
ERIKS bv |
Novaphit SSTC TA-L mit IB 0.1 mm |
92 x 49 x 2 |
2 |
Flexitallic |
Graphite SWG CG 4 Class 300 B16.20 |
4.75 |
4.75 |
Flexitallic |
Graphite SWG CGI (Inner and Out rings 3.10mm thick) |
4.6 |
4.6 |
Flexitallic |
multiFlon |
92 x 49 x 2 |
2 |
Flexitallic |
Sigma 500 – pure PTFE with Glsdd Micropheres |
1.6 |
1.6 |
Flexitallic |
Sigma 511 – PTFE with silica filier |
1.6 |
1.6 |
Flexitallic |
Sigma 533 – PTFE with barium sulphate filier |
1.6 |
1.6 |
Flexitallic |
Sigma 588 – pure PTFE with conformable surface layers |
1.6 |
1.6 |
Flexitallic |
Sigma 600 – Pure ePTFE |
1.6 |
1.6 |
Flexitallic |
Termiculite 815 – Thermiculite with tanged steel core |
1.6 |
1.6 |
Flexitallic |
Thermiculite 835 SWG CG 4 Class 300 |
4.60 |
4.6 |
Flexitallic |
Thermiculite 835 SWG CGI 4 Class 300 |
4.60 |
4.6 |
Flexitallic |
Spiral Wound Gasket CGI style – Graphite filler and 321/1.4541 windings |
149.4 x 127 x 4.6 |
4.6 |
Flexitallic |
SWG CGI Graphite 4 Class 300 |
149 x 126 x 5.0 |
5 |
Flexitallic |
Thermiculite 845 faced Kamm profile 4 Class 300 |
154 x 124 x 4 |
4 |
Flexitallic |
Change Gasket – Flexicarb – 316/316L – WN 1.4401/1.4404 – Dual Certification |
142.8 x 133.6 x 4.6 |
4.6 |
Flexitallic |
Spiral Wound Gasket TH835/321 |
149.4 x 127 x 4.6 |
4.6 |
Flexitallic |
Spiral Wound CGI PTFE/316L |
67 x 55 x 4.6 |
4.6 |
Flexitallic |
Spiral Wound CGI TH835/321L |
67 x 56 x 4.8 |
4.8 |
FMI |
SICHEM S11 |
92 x 49 x 3 |
3 |
FMI |
SICHEM S11 |
92 x 49 x 2 |
2 |
FMI |
SICHEM S11 |
92 x 49 x 1.5 |
1.5 |
FMI |
SICHEM S33 |
92 x 49 x 2 |
2 |
FMI |
SICHEM S33 |
92 x 49 x 3 |
3 |
FMI |
SICHEM S50 |
92 x 49 x 2 |
2 |
FMI |
FLEXIGRAF® FGS3 |
92 x 49 x 2 |
2 |
FMI |
FLEXIGRAF® FGS4 |
92 x 49 x 2 |
2 |
Frenzelit-Werke |
Novaflon ® 300 |
2 |
2 |
Frenzelit-Werke |
novaphit MST with inner eyelet /novaphit MST with inner eyelet and XP-Technology |
92 x 49 x 2.0 |
2 |
Frenzelit-Werke |
novaphit MST/ novaphit MST with XP-Technology |
92 x 49 x 3.0 |
3 |
Frenzelit-Werke |
novaphit MST/ novaphit MST with XP-Technology |
92 x 49 x 2 |
2 |
Frenzelit-Werke |
novaphit SSTC TA-L / novaphit SSTC TA-L with XP-Technology |
92 x 49 x 2.0 |
2 |
Frenzelit-Werke |
novaphit SSTC TA-L / novaphit SSTC TA-L with XP-Technology |
92 x 49 x 1,6 |
1.6 |
Frenzelit-Werke |
novaphit SSTC TA-L with inner eyelet /novaphit SSTC TA-L with inner eyelet and XP-Technology |
92 x 49 x 2.0 |
2 |
Frenzelit-Werke |
novapress UNIVERSAL |
2 |
2 |
Frenzelit-Werke |
novatec PREMIUM XP |
92x49x2 |
2 |
Frenzelit-Werke |
novapress® 880 |
92 x 49 x 2 |
2 |
Frenzelit-Werke |
novapress® 880 |
92 x 49 x 2 |
2 |
Frenzelit-Werke |
novapress® 880 mit Innenbördel 0.1 mm |
92 x 49 x 2 |
2 |
Frenzelit-Werke |
novapress 850 / novaform 2300 |
92 x 49 x 2 |
2 |
Frenzelit-Werke |
novaflon® 500 |
92 x 49 x 2 |
2 |
Gambit-Lubawka |
AF – 400 |
92 x 49 x 2 |
2 |
Gambit-Lubawka |
AF-1000® |
92 x 49 x 2 |
2 |
Gambit-Lubawka |
AF-153 |
92 x 49 x 2.0 |
2 |
Gambit-Lubawka |
AF-200 G |
92 x 49 x 2 |
2 |
Gambit-Lubawka |
AF-200 UNIVERSAL |
92 x 49 x 2 |
2 |
Gambit-Lubawka |
AF-202 |
92 x 49 x 2 |
2 |
Gambit-Lubawka |
AF-300B |
92 x 49 x 2 |
2 |
Gambit-Lubawka |
AF-MF |
92 x 49 x 2 |
2 |
Gambit-Lubawka |
AF-OIL® |
92 x 49 x 1 |
1 |
Gambit-Lubawka |
AF-OIL® |
92 x 49 x 2 |
2 |
Gambit-Lubawka |
AF-U |
92 x 49 x 2 |
2 |
Gambit-Lubawka |
GAMBIT MAGNUM |
92 x 49 x 2 |
2 |
Gambit-Lubawka |
GAMBITGRAF LUX |
92 x 49 x 2 |
2 |
Gambit-Lubawka |
PARO-GAMBIT |
92 x 49 x 2 |
2 |
Garlock |
9900 |
92 x 49 x 2 |
2 |
Garlock |
9900 |
92 x 49 x 2 |
2 |
Garlock |
BG 3000 |
92 x 49 x 2 |
2 |
Garlock |
BG 3000 |
92 x 49 x 2 |
2 |
Garlock |
BLUE-GARD© 3400 |
92 x 49 x 2 |
2 |
Garlock |
BLUE-GARD© 3400 |
92 x 49 x 2 |
2 |
Garlock |
GYLON® Style 3501E |
92 x 49 x 2 |
2 |
Garlock |
GYLON® Style 3501E |
92 x 49 x 3.2 |
3.2 |
Garlock |
Gylon® Style 3504 |
92 x 49 x 3.2 |
3.2 |
Garlock |
Gylon® Style 3504 |
92 x 49 x 2 |
2 |
Garlock |
Gylon® Style 3510 |
92 x 49 x 2 |
2 |
Garlock |
Gylon® Style 3510 |
92 x 49 x 3.2 |
3.2 |
Garlock |
IFG 5500 |
92 x 49 x 2 |
2 |
Heckerwerke |
Centellen WS 3820 |
2 |
2 |
IDT Industrie- und Dichtungstechnik |
IDT – Corrugated gasket with graphite layers and inner eyelet; WS 1.4571/3803/1.4571; IDT style WD20; LE |
92 x 49 x 3 |
3 |
IDT Industrie- und Dichtungstechnik |
IDT – Corrugated gasket with graphite layers; WS 1.4571/3803; IDT style WD10; LE |
92 x 49 x 3 |
3 |
IDT Industrie- und Dichtungstechnik |
IDT – Grooved gasket with graphite layers; WS 1.4571/3803; IDT styles KD10 KD20 and KD30; LE |
69 x 53 x 5 |
5 |
IDT Industrie- und Dichtungstechnik |
IDT – PTFE TFM Envelope gasket with corrugated stainless steel ring; WS 7110/1.4571; IDT style ED01; LE |
92x49x3,5 |
3.5 |
IDT Industrie- und Dichtungstechnik |
IDT – SIGRAFLEX Hochdruck Pro with inner eyelet; WS 3888 IB |
92 x 49 x 2 |
2 |
IDT Industrie- und Dichtungstechnik |
IDT – SIGRAFLEX Hochdruck Pro with pre-compressed centering ring and inner eyelet |
92 x 49 x 2 |
2 |
IDT Industrie- und Dichtungstechnik |
IDT – SIGRAFLEX Universal Pro with inner eyelet; WS 3865 IB |
92 x 49 x 2 |
2 |
IDT Industrie- und Dichtungstechnik |
IDT – Spiral-wound gasket with graphite filler; WS 1.4301/3800/St37 coated; IDT style SD10; LE |
68 x 56 x 4,9 |
4.9 |
IDT Industrie- und Dichtungstechnik |
IDT-SIGRAFLEX-Hochdruck Flachdichtung WS 3885-IB |
92 x 49 x 2 |
2 |
IDT Industrie- und Dichtungstechnik |
IDT-SIGRAFLEX-Hochdruck Pro IDT-WS 3888 FD01 |
92 x 49 x 2 |
2 |
IDT Industrie- und Dichtungstechnik |
IDT-SIGRAFLEX-Hochdruck Pro IDT-WS 3888 FD01 |
92 x 49 x 3 |
3 |
IDT Industrie- und Dichtungstechnik |
IDT-SIGRAFLEX-MF mit Innenbördel / mit Innen- und Außenbördel 1.4571 |
1.95 |
1.95 |
IDT Industrie- und Dichtungstechnik |
IDT-SIGRAFLEX-Universal mit Innenbördel |
1.96 |
1.96 |
IDT Industrie- und Dichtungstechnik |
IDT-SIGRAFLEX-UnIversal Pro Flachdichtung WS 3865 |
92 x 49 x 3 |
3 |
IDT Industrie- und Dichtungstechnik |
IDT-SIGRAFLEX-UnIversal Pro Flachdichtung WS 3865 |
92 x 49 x 2 |
2 |
IDT Industrie- und Dichtungstechnik |
IDT-UNIFLUOR-Flachdichtung WS 7745-HB FD11 Äußerer Bereich vorverdichtet mit Innenbördel aus DyneonTM TFMtm 1600 Dichtungsdicke 2.0mm |
1.98 |
1.98 |
IDT Industrie- und Dichtungstechnik |
UNI SEAL WS 3400 flat gasket -asbestos-free FD01 |
92 x 49 x 2 |
2 |
IDT Industrie- und Dichtungstechnik |
UNIFLOUR WS 7550 FD01 |
2.0 |
2 |
IDT Industrie- und Dichtungstechnik |
Elastik-Dichtung ED10 WS 7110/3825-Code T51 |
49x92x4 |
4 |
IDT Industrie- und Dichtungstechnik |
Elastik-Dichtung ED10 WS 7110/3825-Code T53 |
49x92x4 |
4 |
IDT Industrie- und Dichtungstechnik |
Elastik-Dichtung ED30 WS 1.4571/7110/3825 T52 |
49x92x6.5 |
6.5 |
James Walker |
Centurion |
92 x 49 x 2 |
2 |
James Walker |
Corrusafe – Graphite / PTFE |
97x 58,6 x 2 |
2 |
James Walker |
Graphite filled Spiral-wound – Metaflex Type SG/IR 320/SPG |
4.5 |
4.5 |
James Walker |
Graphite Kammprofile – Metakamm SGK -SPG |
4.9 |
4.9 |
James Walker |
SENTINEL |
92 x 49 x 2 |
2 |
Jungtec |
Flat profile gasket Jungtec ECO + with graphite layers |
72 x 58 x 1,6 |
1,6 |
Jungtec |
Jungstec JP-Top |
4 |
4 |
Jungtec |
Jungtec Revolution |
1.6 |
1.6 |
Kempchen |
A1 RHD2S305-l (316L / Graphit 99%) |
49 / 92 x 2.0 |
2 |
Kempchen |
A1 RS2K110-l |
49 / 92 x 2.0 |
2 |
Kempchen |
A1 RS2S110l |
49/92 x 2.0 |
2 |
Kempchen |
Corrugated gasket W1A-3 – Graphite (1.4571 /0.8 mm; D 1.0 g/cm3) |
49 x 51 /86 x 92 x 2.9 |
2.9 |
Kempchen |
F1 Klinger Sil C4400 with inner eyelet |
49 / 92 x 2.0 |
2 |
Kempchen |
F1 RHD2S305-l (316L / Graphite 99%) with inner eyelet |
49 / 92 x 2.0 |
2 |
Kempchen |
Grooved gasket B25A / B27A / B29A-PTFE unsintered (1.4541 / 0.35 mm) |
53 / 73 x 92 x 4.85 |
4.85 |
Kempchen |
Grooved gasket B25A / B27A / B29A-PTFE unsintered (1.4541 / 0.35 mm) |
53 / 69 x 4.8 |
4.8 |
Kempchen |
Grooved gasket B25A /B27A /B29A – Graphite |
53 / 73 x 92 x 4.85 |
4.85 |
Kempchen |
Grooved gasket B25A /B27A /B29A – Graphite with/without inner eyelet (1.4541 /0.5 mm; D 1.0g/cm3) |
53 / 69 x 92 x 4.9 |
4.9 |
Kempchen |
Grooved gasket B7A /B9A /B15 Graphite (1.4571 /0.5 mm; 1.0 g/cm3) |
53 / 73 x 92 x 4,80 |
4.8 |
Kempchen |
Grooved gasket B7A /B9A /B15A Graphite (1.4541 /0.5 mm; D 1.0g/cm3) |
53 / 69 x 92 x 4,90 |
4.9 |
Kempchen |
Grooved gasket B7A /B9A /B15A PTFE unsintered (1.4541 /0.35 mm) |
53 / 69 x 92 x 4,8 |
4.8 |
Kempchen |
kempchenKNG (in force shunt at Q contact) |
72 x 49 x 5,5 |
5.5 |
Kempchen |
Profil PW21 (1.4541; PTFE-rein; s0.75 mm; chem.-Well. 3 Tlg.) |
49 /x 92 x 3,50 |
3.5 |
Kempchen |
Profil PW5 (1.4541; RS2E1; PTFE-rein; s0.75 mm; chem.-Well. 3 Tlg.) |
49 / x 92 x 6,30 |
6.3 |
Kempchen |
Profile gasket PW21 (1.4541; TFM1600; s0.75mm) |
49 / 92 x 3,5 |
3.5 |
Kempchen |
RivalhermSuper Plus A1 RSP2S205-l (316L /Graphit 99%) |
49 / 92 x 2.0 |
2 |
Kempchen |
Rivatherm Super A1 RS2E2-S (1.4401; 98% D 1.0g/cm) |
49 / 92 x 2 |
2 |
Kempchen |
RivaTherm-Super F1 RS2K110 with inner eyelet |
49 / 92 x 2.0 |
2 |
Kempchen |
RivaTherm-Super F1 RS2S110l with inner eyelet |
49 / 92 x 2.0 |
2 |
Kempchen |
RivaTherm-Super-Plus F1 RSP2S205-l with inner eyelet |
49 / 92 x 2,0 |
2 |
Kempchen |
rubber-steel gasket profile WG (EPDM) |
49 / 92 x 3,95 |
3.95 |
Kempchen |
Spiral wound gasket SpV2i – Graphite (1.4541 /0.5 mm; D 1.0g/cm) |
48 x 54 / 68 x 92 x 4,85 |
4.85 |
Kempchen |
Spiral wound gasket SpV2i – Graphite (1.4541 /0.5 mm; D 1.0g/cm) |
50 x 56 / 68 x 92 x 4,85 |
4.85 |
Kempchen |
Spiraldichtung SpV2i-PTFE ungesintert (1.4541 / 0.7mm) |
48 x 54 / 68 x 92 x 4,85 |
4.85 |
Kempchen |
WLP-Waveline Ergaflex-Steelflon (TFM 1600 in 0.05 mm) Inneneinfassung 0.10 mm |
49 / 92 x 2,30 |
2.3 |
Kempchen |
Kammprofildichtung B9A-Graphit (1.4541 / 0.5 mm; D 1.0 g/cm³) |
53 / 69 x 92 x 4,80 |
4.8 |
KLINGER |
KLINGER® Graphite Laminate PDM200B |
92 x 49 x 2 |
2 |
KLINGER |
KLINGER® Graphite Laminate PSM150B |
92 x 49 x 1.5 |
1.5 |
KLINGER |
KLINGER® Graphite Laminate PSM200B |
92 x 49 x 2 |
2 |
KLINGER |
KLINGER® Graphite Laminate SLS150B |
92 x 49 x 1.5 |
1.5 |
KLINGER |
KLINGER® Graphite Laminate TSM150B |
92 x 49 x 1.5 |
1.5 |
KLINGER |
KLINGER® Graphite Laminate TSM200B |
92 x 49 x 2 |
2 |
KLINGER |
KLINGER® MilamPSS200BI with inner eyelet |
92 x 49 x 2 |
2 |
KLINGER |
KLINGER® Quantum |
92 x 49 x 2 |
2 |
KLINGER |
KLINGER® Quantum |
92 x 49 x 3 |
3 |
KLINGER |
KLINGER® top-chem2000 |
92 x 49 x 3 |
3 |
KLINGER |
KLINGER® top-chem2000 |
92 x 49 x 2 |
2 |
KLINGER |
KLINGER® top-chem-2003 |
92 x 49 x 2 |
2 |
KLINGER |
KLINGER® top-chem-2006 |
92 x 49 x 2 |
2 |
KLINGER |
KLINGER® top-graph-2000 |
92 x 49 x 2 |
2 |
KLINGER |
KLINGER® top-sil-ML1 |
92 x 49 x 2 |
2 |
KLINGER |
KLINGERSIL® C 4265 |
92 x 49 x 2 |
2 |
KLINGER |
KLINGERSIL® C 4300 |
92 x 49 x 2 |
2 |
KLINGER |
KLINGERSIL® C 4400 |
92 x 49 x 2 |
2 |
KLINGER |
KLINGERSIL® C 4400 |
92 x 49 x 3 |
3 |
KLINGER |
KLINGERSIL® C 4409 |
92 x 49 x 2 |
2 |
KLINGER |
KLINGERSIL® C 4430 |
92 x 49 x 2 |
2 |
KLINGER |
KLINGERSIL® C 4430 |
92 x 49 x 3 |
3 |
KLINGER |
KLINGERSIL® C 4430plus |
92 x 49 x 2 |
2 |
KLINGER |
KLINGERSIL® C 4430plus |
92 x 49 x 3 |
3 |
KLINGER |
KLINGERSIL® C 4500 |
92 x 49 x 2 |
2 |
KLINGER |
KLINGERSIL® C 4509 |
92 x 49 x 2 |
2 |
KLINGER |
KLINGERSIL® C 8200 |
92 x 49 x 2 |
2 |
KLINGER |
KLINGER® top-chem2000soft |
92 x 49 x 2 |
2 |
KLINGER |
top-chem2005 |
92 x 49 x 2 |
2 |
Kroll + Ziller |
G-ST-P/S EPDM |
92 x 49 x 4 |
4 |
Kroll + Ziller |
G-ST-P/S FPM |
92 x 49 x 4 |
4 |
KWO Dichtungstechnik |
MultiTex® |
92 x 49 x 2 |
2 |
KWO Dichtungstechnik |
MultiTex® Tape (width 10 mm) |
80.5 x 60.5 x 2 |
2 |
KWO Dichtungstechnik |
Universal-F Premium tape (width 5 mm) |
75.5 x 65.5 x 2 |
2 |
Leader Gasket of Slovakia |
Elastagraph 316SS corrugated with graphite |
92 x 48 x 2.4 |
2.4 |
Leader Gasket of Slovakia |
LG – 413 |
74 x 53 x 4,8 |
4.8 |
Leader Gasket of Slovakia |
LG13 – IR |
69 x 55 x 4,8 |
4.8 |
Leader Gasket of Slovakia |
Clipperlon 2110 |
92 x 49 x 2 |
2 |
Leader Gasket of Slovakia |
Clipperlon 2110 |
92 x 49 x 2 |
2 |
Leader Gasket of Slovakia |
CG3-3mm pitch/G21-3mm pitch corrugated with graphite |
92 x 49 x 3 |
3 |
Leader Gasket of Slovakia |
CG3-3mm pitch/G21-3mm pitch corrugated with graphite |
92 x 49 x 3 |
3 |
M.Zilken GmbH |
Zilken corrugated gasket 1.4571 with graphite layers and inner eyelet 1.4571 – type: ZK105027 |
92 x 49 x 3.0 |
3 |
M.Zilken GmbH |
Zilken corrugated gasket 1.4571 with TFM1600-envelope – type: ZK104022 |
92 x 49 x 3.5 |
3.5 |
Matusza-Dichtungstechnik GmbH |
Corrugated gasket with graphite layers – Matusza Wellring MF XP |
92 x 50 x 2.75 |
2.75 |
Möller Metalldichtungen |
MMBI-10C2I-Pro with inner eyelet (1.4571; 0.15 mm) |
92 x 49 x 2 |
2 |
Möller Metalldichtungen |
MMBI-SSTC-TAL with inner eyelet (1.4571; 0.15 mm) |
92 x 49 x 2 |
2 |
Möller Metalldichtungen |
MMK(Z) (kammprofile gasket with graphit layers) |
69 x 53 x 4.8 |
4.8 |
Möller Metalldichtungen |
MMKBZ (convex kammprofile gasket with graphite layers) |
69 x 53 x 4,8 |
4.8 |
Möller Metalldichtungen |
MMKZ1P (kammprofile gasket with PTFE layers) |
69 x 53 x 5 |
5 |
Möller Metalldichtungen |
MMSIA graphite spiral wound gasket |
68 x 56 x 5 |
5 |
Möller Metalldichtungen |
MMSIA with mica (spiralwound with mica carrier material 1.4541) |
68 x 56 x 5 |
5 |
Möller Metalldichtungen |
MMWHD (envelope gasket with inner inside diffusion barrier and stainless steel corrugated ring) |
92 x 49 x 3.5 |
3.5 |
Möller Metalldichtungen |
MMWIB with graphite (corrugated gasket with graphite layers and inner eyelet) |
92 x 49 x 3.0 |
3 |
Möller Metalldichtungen |
MMWV-G (corrugated gasket with graphite layers) |
91 x 50 x 3 |
3 |
MONTERO FYE |
BELPA® CSA 90 |
92 x 49 x 2 |
2 |
MONTERO FYE |
BELPAGRAF SE |
2 |
2 |
Reinz-Dichtungs-GmbH |
AFM 34 |
92 x 49 x 2 |
2 |
Reinz-Dichtungs-GmbH |
AFM 34 CO ME |
92 x 49 x 2 |
2 |
Reinz-Dichtungs-GmbH |
AFM 34 CO ME |
92 x 49 x 2 |
2 |
Revoseal Europe GmbH |
JP-2 graphite |
66.4 x 56.2 x 4.2 |
4.2 |
Revoseal Europe GmbH |
Eco+ with graphite |
77 x 65 x 1.6 |
1.6 |
Revoseal Europe GmbH |
Revolution with graphite |
69 x 57 x 1.6 |
1.6 |
Rich. KLINGER |
KGS/EPDM |
92 x 49 x 4 |
4 |
Rich. KLINGER |
KGS/FKM/Viton |
92 x 49 x 4 |
4 |
Rich. KLINGER |
KGS/NBR |
92 x 49 x 4 |
4 |
SGL Group |
Sgraflex Hexagon V20010C8-P |
92 x 49 x 2 |
2 |
SGL Group |
Sigraflex Basis L20010C |
92 x 49 x 2 |
2 |
SGL Group |
Sigraflex Economy V05510C4 |
92 x 49 x 0.55 |
0.55 |
SGL Group |
SIgraflex Economy V07510C4 |
92 x 49 x 0.75 |
0.75 |
SGL Group |
Sigraflex Economy V15010C4 |
92x 49x 1,5 |
1.5 |
SGL Group |
Sigraflex Economy V20010C4 |
92 x 49 x 2 |
2 |
SGL Group |
Sigraflex Economy V20010C4 |
92 x 49 x 2 |
2 |
SGL Group |
Sigraflex Hochdruck Pro V10011Z3I-P |
92 x 49 x 1 |
1 |
SGL Group |
Sigraflex Hochdruck Pro V15011Z3I-P |
92 x 49 x 1.5 |
1.5 |
SGL Group |
SIgraflex Hochdruck Pro V20011Z3I-P |
92 x 49 x 2 |
2 |
SGL Group |
SIgraflex Hochdruck Pro V30011Z3I-P |
92 x 49 x 3 |
3 |
SGL Group |
Sigraflex Hochdruck V10011Z3I |
92 x 49 x 1 |
1 |
SGL Group |
Sigraflex Hochdruck V15011Z3I |
92 x 49 x 1,5 |
1.5 |
SGL Group |
SIgraflex Hochdruck V20011Z3I |
92 x 49 x 2 |
2 |
SGL Group |
SIgraflex Hochdruck V20011Z3I |
92 x 49 x 2 |
2 |
SGL Group |
SIgraflex Hochdruck V30011Z3I |
92 x 49 x 3 |
3 |
SGL Group |
Sigraflex MF V20011Z2MF IB |
92 x 49 x 2 |
2 |
SGL Group |
Sigraflex MF V20011Z2MF IB |
92 x 49 x 2 |
2 |
SGL Group |
Sigraflex MF V30011Z2MF IB |
92 x 49 x 3 |
3 |
SGL Group |
Sigraflex Select V16010C3IIB |
92x 49x 1.6 |
1.6 |
SGL Group |
Sigraflex Select V16010C3IIB |
92 x 49 x 1.6 |
1.6 |
SGL Group |
Sigraflex Select V16010C3IIB |
92 x 49 x 1.6 |
1.6 |
SGL Group |
SIgraflex Standard L20010CI |
92 x 49 x 2 |
2 |
SGL Group |
SIgraflex Standard L20010CI |
92 x 49 x 2 |
2 |
SGL Group |
Sigraflex Universal Pro V20010C2I-P |
92 x 49 x 2 |
2 |
SGL Group |
Sigraflex Universal Pro V30010C2I-P |
92 x 49 x 3 |
3 |
SGL Group |
Sigraflex Universal Pro V30010C2I-P |
92 x 49 x 3 |
3 |
SGL Group |
Sigraflex Universal V20010C2I |
92 x 49 x 2 |
2 |
SGL Group |
Sigraseal V20010M2 |
92 x 49 x 2 |
2 |
SGL Group |
Sigraflex APX2 Hochdruck V30011W3 |
92 x 49 x 3 |
3 |
SGL Group |
Sigraflex SGL Universal V15010C2I |
92 x 49 x 1.5 |
1.5 |
SPETECH |
DryFlex (3mm of AISI 316L + 2×0.4mm of SPETOTERM TUI 810) |
3,6 |
3.6 |
SPETECH |
DryFlex (3mm of AISI 316L + 2×0.5mm of Sigraflex C) |
3,8 |
3.8 |
SPETECH |
DrYFlex ® (3mm of AISI316L + 2×0.35 mm of PTFE) |
3.5 |
3.5 |
SPETECH |
SPETOBAR® BAS® 340 |
92 x 49 x 2 |
2 |
SPETECH |
SPETOGRAF® GUS® 30 PRO |
92 x 49 x 2 |
2 |
SPETECH |
SPETOGRAF® GUS® 40 PRO |
92 x 49 x 2 |
2 |
SPETECH |
SPETOMET® MPL 121 FGC |
92x 51 x 2,5 |
2.5 |
SPETECH |
SPETOMET® MWK 50 FG-C |
69 x 53 x 3,8 |
3.8 |
SPETECH |
SPETOMET® MWK 60 FG-C |
69 x 53 x 3,8 |
3.8 |
SPETECH |
SPETORING® R-BZ 316L/ silver |
69 x 53 x 3 |
3 |
SPETECH |
Spetospir SWZ Graphite |
72 x 56 x 4,8 |
4.8 |
SPETECH |
Spetospir SWZ PTFE |
72 x 56 x 4,8 |
4.8 |
Teadit International |
24 SH |
92 x 49 x 2 |
2 |
Teadit International |
24 SH |
92 x 49 x 3 |
3 |
Teadit International |
24 SH |
92 x 49 x 3 |
3 |
Teadit International |
24 SH |
92 x 49 x 6 |
6 |
Teadit International |
24 SH |
92 x 49 x 2 |
2 |
Teadit International |
28LS-LE |
92 x 49 x 3 |
3 |
Teadit International |
NA 1002 |
92 x 49 x 2 |
2 |
Teadit International |
NA 1100 |
92 x 49 x 2 |
2 |
Teadit International |
TF 1510 |
92 x 49 x 2 |
2 |
Teadit International |
TF 1570 |
92 x 49 x 3 |
3 |
Teadit International |
TF 1570 |
92 x 49 x 2 |
2 |
Teadit International |
TF 1580 |
92 x 49 x 2 |
2 |
Teadit International |
TF 1590 |
92 x 49 x 3 |
3 |
Teadit International |
TF 1590 |
92 x 49 x 2 |
2 |
Teadit International |
24 B |
120 x 110 x 2 |
2 |
Teadit International |
30 SH |
92 x 49 x 3 |
3 |
Teadit International |
30 SH |
92 x 49 x 2 |
2 |
Triangle Fluid Controls Ltd |
D9000 with Glass filler |
90 x 50 x 2 |
2 |
W.L. Gore & Associates |
GORE® GR Sheet Gasketing |
92 x 49 x 1,5 |
1.5 |
W.L. Gore & Associates |
GORE® GR Sheet Gasketing |
92 x 49 x 6 |
6 |
W.L. Gore & Associates |
GORE® GR Sheet Gasketing |
92x 49x 3 |
3 |
W.L. Gore & Associates |
Gore® Joint Sealant DF05 |
121 x 111 x 2 |
2 |
W.L. Gore & Associates |
Gore® Joint Sealant DF05 |
121 x 111 x 2 |
2 |
W.L. Gore & Associates |
GORE® STA-PURE® Pipe Gasket Style 1500 |
92 x 49 x 1.5 |
1.5 |
W.L. Gore & Associates |
GORE® STA-PURE® Pipe Gasket Style 1500 |
92 x 49 x 3 |
3 |
W.L. Gore & Associates |
GORE® STA-PURE® Pipe Gasket Style 1500 |
92 x 49 x 6 |
6 |
W.L. Gore & Associates |
GORE® Universal Pipe Gasket (Style 800) |
92 x 49 x 3 |
3 |
W.L. Gore & Associates |
GORE® Universal Pipe Gasket (Style 800) |
92x 49x 1,5 |
1.5 |
W.L. Gore & Associates |
GORE® Universal Pipe Gasket (Style 800) |
92 x 49 x 6 |
6 |
W.L. Gore & Associates |
GORE® STA-PURE® Sheet Gasketing Style 1200 |
92 x 49 x 1.5 |
1.5 |
W.L. Gore & Associates |
GORE® STA-PURE® Sheet Gasketing Style 1200 |
92 x 49 x 6 |
6 |
W.L. Gore & Associates |
GORE® STA-PURE® Sheet Gasketing Style 1200 |
92 x 49 x 3 |
3 |
W.L. Gore & Associates |
GORE® Gasket Tape Series 500 |
151 x 111 x 6 |
6 |
W.L. Gore & Associates |
GORE® Gasket Tape Series 500 |
131 x 111 x 3 |
3 |