|
Program description |
| PROJECT |
Basic module, BOM |
| B0 |
Design pressure according to B0 / test pressure according to HP30 |
| B1 |
Cylindrical and spherical shells under internal pressure |
| B2 |
Conical shells under internal and external pressure |
| B3 |
Dished heads under internal and external pressure |
| B4 |
Spherically dished covers |
| B5 |
Flat heads and plates with anchorages incl. B51A and B51C
and module B51 heat exchanger tubesheets and plate deflection |
| B6 |
Cylindrical shells under external pressure |
| B7 |
Bolts |
| B8 |
Flanges (incl. module 25V) |
| B9 |
Openings in cylindrical, conical and spherical shells under internal pressure |
| B10 |
Thick-walled cylindrical jackets under internal pressure |
| B13 |
Single-ply expansion joints (see EJMA) |
| PMAX |
Determination of the max. allowable pressure for the complete vessel |
| IGEL |
Strength proof of nozzles Determination of local forces and moments from the NozzleSpecApp and their superposition for vertical and horizontal vessels.
requires B1 + B3 + B9. see also ESMC 912 |
| WERK |
Material database with approx. 4700 material entries |
| Â |
Module package AD 2000 / section B
|
|
| S1 |
Simplified proof against oscillating stress |
| PMAX / NZUL |
Determination of the max. allowable pressures and load cycles for the complete vessel |
| S2 |
Proof against cyclic loading. For complex geometries we recommend determining the principal stresses by FEM |
| Â |
Module package AD 2000 / S1 + S2 incl. Pmax/Nzul
|
|
| S3.0 |
Proof of strength according to AD-S3/0 incl. load table |
| S3.1 |
Vessels on skirts (see also EN Module EN 16.12) |
| S3.2 |
Horizontal tanks on saddles incl. module EN 16.14 (see also module EN 16.8) |
| S3.3 |
Vessels with dished heads on legs (see also EN Module EN 16.11) |
| S3.4 |
Vessels with bracket supports (see also EN Module EN 16.10) |
| S3.5 |
Calculation of support rings and ring girders for vessels (see also EN Module 16.13) |
| S3.6 |
Calculation of vessels with nozzles under external loadings |
| Â |
Module package AD 2000 / S3.0 – S3.4 incl. ZIEH |
| Â |
Module package AD 2000 / S3.0 – S3.6 incl. ZIEH
|
|
 |
 |
|
>>
|
Maintenance AD 2000 / B 12 months (Updates and support*)
The support includes help for program operation in the usual scope, approx. 1h, |
| Â |
| >> |
European with the European Standard EN |
| Â |
When you purchase the AD 2000 module package, you receive Euronorm modules at a reasonable price as an add-on. Please have a look at the special offers and the Combi package EUROPE. |