Program description

Price EUR

AC

Cross-flow heat exchangers / air coolers

Standard version of register heat exchanger with plain or different finned tubes, partial condensation with additional physical properties (see scope of delivery)

3.100,–

DNK

Cross-flow heat exchangers / air coolers

Calculation of intermediate temperatures and steam / condensate quantities in steam / post-steam condensation in heat exchanger groups (12 heat exchanger arrangements)

1.400,–

MUKO

Multi-component condenser

Cross-flow condenser with smooth / finned tubes incl. DDB-Flash. (Multi-component condensation in the tubes)

3.900,–

WTS

Shell and tube heat exchangers

Basic version for the calculation of single-phase media (liquid / gaseous), condensation of pure substances on smooth pipes, strongly revised tube sheet layout module SPIE, true-to-scale sketch
(see scope of delivery)

4.800,–

Additional modules for WTS

KOND

1. pure substance condensers with desuperheating zone, condensation and subcooling zone, TEMA, graphics, multitube / calculation without baffle plates

plus 600

DPW

2. Double-pipe heat exchanger(concentric annular gap) and hairpin heat exchanger (hairpin, shell without baffles). Thermal and hydraulic design of a hairpin heat exchanger incl. modules G2 + GGO + GGLR

plus 770

LAM

3. Fin block Thermal and hydraulic calculation of shell-and-tube heat exchangers with fin block

plus 770

EWTS

Electric heater

Standard version for thermal and hydraulic design of forced-flow, electrically heated shell-and-tube heat exchangers

4.500,–

Extra charge to WTS
(requires latest version)

1.800,–

VERD

Evaporation of pure substances on smooth pipes incl. tube sheet library, TEMA, with additional physical properties
(see scope of delivery)

3.600,–

COIL

Helical coil heat exchangers

(pipe coil in a flow-through vessel) for gaseous and liquid media, up to 5 parallel flow-through pipes

2.300,–

KOAX

Helical double-pipe heat exchanger / coaxial heat exchanger. Calculation of heat transfer and pressure drop in double-pipe heat exchangers in helical design

1800,–

Extra charge to COIL

770,–

BREN

Thermal oil heater

Calculation and simulation of thermal oil heaters
(with extensive carrier oil data base) incl. T-OIL module

3.200,–

WAK

Coil type economizers/ flue gas heaters

Helical tube heat recovery boiler with up to 14 tube baskets, thermal oil heating,
Physical properties H2O / HFO / Luft / OEL / RGAS / T-OIL

2.400,–

TANK

storage tanks

Calculation of heat loss for insulated and heated storage tanks. The ground plan of the storage tank can be roundor rectangular.

Heat losses via the roof due to radiation, via the floor with a new approach. Design of the heating coil for heat loss compensation.

New:

  • Additional heating with welded half pipe coil.
  • Calculation of heating time and cooling time. (Requires module TIME extra charge 600 EUR)

1.600,–

MMP

plate heat exchanger

Calculation of pressure loss and heat transfer with chevron type plates, only for single-phase media, no condensation
including essential properties

1.400,–

MESK

Multi-component mixture condenser

Calculation of pure / multi-component mixture condensers with / without inert gas (incl. PROPER 3)
requires MS ACCESS

6.400,–

RS3

Triple tube

Heat exchanger with concentric triple tube

510,–

Printout in German at an extra charge of 10% of the list price

Not available in English: Program GVas stand-alone program and MESK

This post is also available in: Deutsch (German)